The technology in the cistern
Pre-assembled components, digitally controllable.
- Max. Water pressure: 10 bar (1 MPa)
- Minimum flow pressure: 1 bar (0,1 MPa)
- Calculation flow: 5 l/min
A dynamic flow valve ensures a constant volume flow of 5 l/min in the working range from 1 to 10 bar. Over the calculated flushing time, the respective programmed flush volume is discharged.
- 2-pin plug for 12 V power supply
- 5-pin plug for optional connection of building control technology
- All components can be inspected via the flush plate
TECEsmartflow - programmed in just a few steps
Choose between the “Weekdays” and “Interval” flush programmes.
The interval and the flush volume can be adjusted continuously. The interval timer is reset after a normal water withdrawal and restarts.
Days and times at which flushing is to take place can be selected. Here, too, the flush volume can be adjusted continuously. Regular water use suspends the automatic flush scheduled for the day.
The flush volumes for hot and cold water can be set independently of each other on each unit to the individual line volumes.
Every piping system has room for reliability and hygiene
Example – Public/semi-public buildings: Looped series installation in a multi-toilet system
The TECEprofil toilet module with integrated hygiene flush is arranged as the last consumer in the drinking water installation so that the entire line content up to the riser pipe is replaced during an automatic flushing process. Thanks to the infinitely adjustable flush volume, even larger pipe volumes can be replaced. For example, in a public toilet with several consumers. In public and semi-public areas, the "Interval" flush programme is suitable for covering even shorter interruptions in use.
Example – Hotel: Bathroom installation with dual washstand and looped serial installation.
Also here, the TECEprofil toilet module with integrated hygiene flush is arranged as the last consumer in the drinking water installation. Hotel guests in occupied rooms should not be disturbed by an automatic hygiene flush. The "Weekdays" flush programme helps here. In this programme, the flush time can be selected so that there are usually no guests in the rooms at this time (e.g. 11:30 a.m.).