Spotlight on the toilet terminal
Press and flush was yesterday. The toilet of today can do so much more: rinse and blow dry, purify the air and flush automatically. But the aesthetics are often sacrificed for this additional hygiene and comfort.TECE has now created a form that unites all functions. The technology disappears into the wall and all that remains visible is a flat facing made of white safety glass.
TECElux is the terminal for all toilet functions of today - and tomorrow.
Design & Technology
The toilet terminal TECElux hides the working parts behind the wall. An extremely flat glass facing closes the inspection opening and conceals the cistern, connections for water and power and, depending on the version, an odour extraction or height adjustment for the ceramics.
With its simple aesthetics, TECElux blends in with the architecture of any bathroom. The terminal's large glass surface consists of two parts that give the appearance of a single unit. The glass facing serves as a splash guard for the wall and means the wall does not have to be tiled. The toilet terminal can be combined with practically any ceramics and even with shower toilets.
An overview of all functions
At first glance, it's simply a glass plate. But the button outline lights up when someone approaches. The function becomes clear: A slight touch with the finger is all that is needed to actuate the small or large flush - up close, even without touching (approx. 10 mm).
The programming options of the sen-Touch electronics enable the advanced version of TECElux to be adapted to individual needs and a range of requirements.
Our newly developed air purification system operates invisibly, quietly and without intrusive cover-up fragrances. The air purification system works with a new kind of ceramic activated carbon filter. Odours are drawn away at the source and cleaned air is passed back into the room. There is no need for any extra fresh air which would first have to be warmed. The filter only has to be replaced every five years.
The system automatically stops after a short follow-up time to avoid unnecessary power consumption.
Extremely quiet or very powerful:
The fan strength can be adjusted to a number of levels.
TECElux "m-Lift" enables you to adjust the height of the toilet ceramics at any time, even after the module has been installed. The ceramics do not have to be removed.
The height of the ceramics can be continuously adjusted in an 8 centimetre range with an adjusting spindle. The glass front moves with the ceramics, so the overall appearance is not marred by joints or gaps.
The new toilet terminal takes equal account of aesthetic and functional factors. TECElux integrates the system components in the pre-wall module invisibly and safely. The large inspection opening is covered by a flat glass facing that permits quick access to the components behind it at any time.
As an open interface between the toilet functions and architecture, the toilet terminal can be combined with almost any ceramic elements and also with shower toilet units.
Open for all future technologies:
Water, waste water, electrics, height adjustment and the filter solution are housed here.
- Sensor recognition range
- Illumination brightness of the display
- Hygiene flush
- Safety flush
- Subsequent odour extraction
- Intensity of odour extraction
- Cleaning function
Form and function
However, It is easily accessible even after installation thanks to the removable upper glass facing and the large inspection opening. Retrofitting, assembly and maintenance can therefore be carried out with little effort. The terminal with cistern forms the basis, and you choose the range of functions.
A TECElux toilet terminal always consists of:
- a TECElux toilet module
- an upper glass facing with actuation unit in white or black
- a lower glass facing with toilet attachment and notches for different power and water connections in white or black
Our toilet terminal TECElux hides the working parts behind the wall. An extra-flat glass plate covers the inspection opening and conceals the cistern, connections for water and power
The terminal's large glass surface consists of two parts that give the appearance of a single unit. The glass facing serves as a splash guard for the wall and means the wall does not have to be tiled.
The TECElux module is available in three different versions - TECElux 100, 200 and 400. All modules consist of the same self-supporting, stable mounting frame and the proven TECE dual-flush cistern.
Manual actuation with coloured buttons
Design in white glass with white buttons or black glass with black buttons
Manual actuation with chrome buttons
Design in white glass with bright chrome buttons or black glass with bright chrome buttons
Electronic "sen-Touch" actuation
Design in white glass with or black glass
For combination with standard toilet ceramics, with shower toilet attachments and shower toilets from various manufacturers, e.g. TOTO, Geberit Aquaclean, Sela, Duravit SensoWash C or V & B Viclean U.
Upgrade set as accessory
Upgrade set for subsequent installation of "ceramic-Air" odour extraction for toilet terminal TECElux 100 or TECElux 200.
The TECElux glass facings can be installed in just a few simple steps.
The system components remain behind the wall – but are easily accessible via the removable upper glass facing and large inspection opening.
This makes assembly and maintenance much easier.
Video: TECElux toilet terminal
You can find a quick overview of the functions of the height-adjustable TECElux toilet terminal in our video.
TECElux - outstanding for form and function
TECElux has already received numerous awards for its intelligent combination of design and function.