(1) Cut to length
(3) Plug in
Quickly made, can be dismantled if necessary.
From 16 - 63 mm.
If you want to create a TECElogo Push connection, you only need one calibrator and your hands in each dimension. Two turns with the tool and a very small amount of force when plugging together guarantee a permanently tight connection. For potable water, heating or compressed air. For dimension 16 mm, 20 mm or also 63 mm. No danger of confusing the seals, no heavy pressing machines and no complicated work steps. Chamfer, plug in, finished.
Plugged in incorrectly, simply released
Quickly making the last connection and that's when it happens: you put on the wrong fitting! With TECElogo-Push, this is no problem: in just a few steps, you have unscrewed the fitting and can put on the correct one. Of course, you can reuse the pipe and fitting. This saves money and protects the environment. Quick, easy, safe: TECElogo.
Everything ready to hand
With the practical TECElogo-Push belt bag, you always have all the tools you need right at hand. And the dimensions can be changed in seconds. Quick, simple, easy. Simply TECElogo-Push.
You will find everything you need to make or loosen a TECElogo push connection in this small case. What you won't find, however, are high purchase costs or a heavy weight compared to conventional pressing machines. And you won't find any annual maintenance costs either, because the same applies to tools for TECElogo-Push: quick, simple, light.
Well considered details for your everyday work on the construction site.
Above your head? Of course!
What weighs more: a pressing tool or your hands?
One thing is clear: If you only need your hands for the installation, you will have an easier time. This is especially true for working above your head.