Overview Newsblog
12.03.2017 - TECEnews

TECEprofil - childrens module

Childrens module

TECE is presenting a new toilet module, especially designed for children’s standing toilets. The cistern is installed at a lower level so that small children can easily reach the flush as well.

The low seat height of a children’s standing toilet requires a low connection height, increasing the assembly effort for standard products. The building services experts from Emsdetten have therefore developed a pre-wall module, especially for toilets at child-height. The height of the module, made with a self-supporting and soundproof steel construction, is 1120 millimetres. At the lowest crossbeam, there is a drill hole in case a retaining clamp for a drainage elbow needs to be attached. Based on additional holes and slots in the frame, the module can be installed in a TECEprofil wall or a metal and wooden post-and-beam wall. A pre-wall installation as a single module is also possible. In order to allow for the floor design, the foot supports can be height-adjusted up to 20 centimetres. A foot brake, specially-developed and now optimised by TECE, makes one-man installation easier, giving the fitter a clear time advantage. In this module, too, the TECE universal cistern with dual-flush technology is built in. This has been sold in millions. The only difference being: It is positioned ten centimetres lower so that small children can reach the flush without problems as well.

TECEprofil - Kindermodul
With the new TECEprofil module, children’s standing toilets can be installed without increased effort, despite a lower connection height.