Small and compact in the wall

TECEcompact is a new cistern offering tried and tested technology with a reduced design – the ideal solution for wall installation with special focus on using water more sparingly. Clever details facilitate installation and maintenance.

The TECEcompact cistern offers real added value with its small wall mount of just 85 millimetres. It is available in addition to the brick wall modules for stand-mounted and wall-hung WC ceramics for installation in a solid wall or for surface-mounting, and as a drywall module with a construction height of 1,080 millimetres. The latter is also suitable for space-saving mounting in the corner of a room. Like all other toilet modules made by TECE, the TECEcompact cistern also withstands loads of up to 400 kilograms.

The compact housing made of shock-resistant polypropylene holds 6.5 litres of water. Its variable dual-flush technology allows the flush volume to be adapted perfectly to different circumstances. This means that either water can be saved by using a lower flush volume, or that drains with a small diameter can be prevented from blocking up with a larger volume of water. The large flush is set to 6.0 litres. It can be optionally adjusted to 4, 4.5 or 4.8 litres with a slide control. The low flush volume of 3 litres always remains constant. Should the flush not work properly, the flushing pressure can be adjusted using a throttle set on different WC ceramics. By replacing the throttle ring in the valve seating, the flushing pressure can be reduced or increased. 

Despite its condensed construction, all components can be easily removed and refitted thanks to the generously proportioned inspection opening. Sensitive parts are housed inside a polystyrene protection system in the structural work which protects the cistern from building site dirt. The system is mounted in the structural work in three easy steps: Firstly, insert the water connection nipple from the outside into the cover, and connect to the supply line. Then, push the stop cock from the inside and attach to the water connection nipple with a clip. Finally, insert the actuation mechanism into the tank, and the cistern is ready for use.