TECEflex connections can be made with hand tools up to dimension 32 mm. The craftsman can make the majority of the connections using their muscle power. No mains electricity or battery required. The tools are very light but still thoroughly robust. They don't require any regular maintenance. For the connection: Slide the sleeve onto the press collar - connection secure!
Alternatively, the RazFaz battery-powered processing tools are available for TECEflex dimensions up to 32 mm. With these tools you can handle pressings even in tight construction site situations. The special highlight is the dual press yoke. Thus two dimensions can always be pressed without switching the jaws. Maintenance is unnecessary here too. Nevertheless, the tools should be serviced now and again for maintenance purposes.
Dimensions from 40 - 63 mm require the PMA 40 63 pressing machine attachments. They channel the power of the pressing machine into an extremely effective axial pressing movement. If a pressing machine doesn't exert enough power, this is immediately noticeable as the pressure sleeve is not slid onto the collar. The same pressing machine would probably cause loose connection if it is used for a radial pressing system.
This handy, lightweight case contains everything you need to cut, calibrate and release a connection. There are no heavy pressing tools here. You can also save on annual maintenance costs and high acquisition costs for pressing tools.
TECEflex pressure sleeves/manual pressing tools
Order number: 720050
TECEflex manual pipe expanding tool
Order number: 720056
TECEflex RazFaz cordl. press. tool
Order number: 720173
TECEflex RazFax accumulator-operated expanding too
Order number: 720172
TECEflex manual tool set
Dimension: 14-32 or 16-32
Order number: 720174 or 720203
TECEflex PMA 40 63 pressing tool
Order number: 720170