TECEdrainline – Traps
Flexible, hygienic and reliable, TECEdrainline delivers thoughtful details all the way to the drain, making this proven shower channel particularly appealing to both installers and customers.
Designed to perform even on the toughest days on site
The connection between the drain and the channel features a strong snap lock that closes securely when pushed into place, creating a tight and firm connection. At the same time, the drain can still be rotated if needed.
Flexible all-round
TECEdrainline drains can be rotated a full 360 degrees, allowing for particularly easy connection to the drain pipe.
Extra safe against odours
The retrofittable membrane odour trap for TECEdrainline drains creates a double siphon effect together with the sealing water. It minimises evaporation of the sealing water through its membrane and prevents the entry of vermin, making it particularly suitable for showers that are used infrequently.
Easy to clean
For stubborn blockages, the drain pipe can be cleaned using a small hand spiral. A marking on the inside indicates the position of the drain socket.
Select the drain according to your requirements.
TECEdrainline drains are available in four variants for lateral connection and for vertical connection to the wastewater pipe. The selection of the drain pan is based on the required drainage capacity and the available construction height of the floor. The height for the floor insulation and the slope of the wastewater pipe should also be taken into account when making the selection.
| Drain | h2*[mm] | Capacity[l/s] |
|---|---|---|
| flat | 80 | 0,8 |
| standard | 105 | 0,9 |
| vertical | 52 | 1,3 |
Drain norm
TECEdrainline standard 50mm horizontal trap
Capacity 0.9 litres per second, drain can be rotated 360 degrees, with a removable siphon dip tube
Drain vertical
TECEdrainline standard vertical trap
Capacity 1.3 litres per second, drain can be rotated 360 degrees, with a removable siphon dip tube
Drain flat
TECEdrainline flat horizontal trap
Capacity 0.8 litres per second, drain can be rotated 360 degrees, with a removable siphon dip tube
Assembly feet
Assembly feet allow easy height adjustment and secure positioning of the channel body during unfinished installation. They are available in heights of 94 to 142 millimetres and 139 to 182 millimetres.
Drainbase sound insulation mat
Sound insulation mat for installation under floating screed in the area of floor-level showers or in the entire bathroom. For reducing installation noise and for impact sound insulation for renovation and new construction.
Membrane odour trap
Plastic immersion pipe with inner sealing lip membrane as protection against evaporation, barrier against odour and vermin.
Hair trap
Hair trap made of stainless steel, for fitting
into the TECEdrainline channel body.
FireStop fire protection set
For direct installation on the drain TECEdrainline DN 50 vertical, for highly fire-resistant bulkheading of ceiling penetrations in solid ceilings.